Stainless Steel Plate Shearing Welding Matters

- Jun 29, 2017 -

1. Shearing: The use of shear plate shear thickness of large martensite series and Ferrite series stainless steel plate, sometimes cracks, Martensite series and Ferrite series stainless steel and ordinary steel under the same conditions, there is almost no problem, and when shearing austenitic series Stainless steel, if the set shear gap is too large, will be in the Shear austenitic series Stainless steel, if the setting of the shear gap is too large, will be cut off the surface, resulting in larger burrs.

2. Gas cutting: Ordinary steel use of ethylene and other gas cutting is very easy, and stainless steel is iron and CR alloy, because of the production of chromium oxide, and hinder its molten steel. Rubber grinder.